| Author | Message | ||
     Jdorp_ |
i got my 03 xb9s about 2 weeks ago. the bikes rims are dirty, but because the rims are slightly porous i can't get them really clean. does this just happen over time, or did the previous owner 'let them go'. is there a way to do this, or should i paint them black. if i paint them black, what is the best way to do it. can they be powder coated? what have other guys done? | ||
| Xb9er |
powder coat those hogs black. | ||
| Danman2540 |
go to the car wash and use the presoak stuff on them, then wash them real good with the high pressure there. then polish the lips. see mine in my profile. | ||
| Cmm213 |
Dont point high pressure water near the wheel bearings! You can always use some simple green and good rim brush. | ||
| Snakedriver |
Hey Jdorp, If you go the paint or powder coat route, Ill trade you my amber rims. Im looking for a pair of silver rims. Leo | ||
| Buellfighter |
Powder coated!  Jdorp, I was tired of polishing also. | ||
| Cyclone |
Use S100. Let it soak in. It the best that I have found. |
