| Author | Message | ||
     Rkutzner |
What's out there for this? For my VRod it was just a plug in module and red lenses (plus a really cool LED brake light!). I'd prefer something like that but am willing to clip and solder. | ||
| Fullpower |
I just stuck an LED in each turn signal housing, series resistor, and wired each to the tail light wire. instant running lights, draw maybe 1 watt total and cost was about 3 dollars with postage. | ||
| Rkutzner |
But no brake? I'm greedy, I want it all. | ||
| Skully |
American Sport Bike sells a really nice all-in-one:http://www.americansportbike.com/shoponline/ccp0-p rodshow/9038.html You can save nearly $100 by assembling it yourself. Look a little farther down the page. | ||
| Bayou_flyer |
what is the diferance between these two http://www.americansportbike.com/shoponline/ccp0-p rodshow/9037.html http://www.americansportbike.com/shoponline/ccp0-p rodshow/9038.html | ||
| Skully |
The 9038 is ready to bolt and plug in. The 9037 has to be assembled by you. I did this and it is pretty easy with Al's instructions. You save mucho $$$. |
