G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile


Buell Motorcycle Forum » XBoard » Buell XBoard Archives » Archive through May 01, 2007 » Checking the fan on an R? « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Olinxb12r
Posted on Tuesday, April 24, 2007 - 10:19 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

So the check engine light on my 12R goes off after the fuel pump does it's deal like it is supposed to, but it comes back on and stays on after a couple seconds. The bike seems to be running fine, but I haven't heard the fan for a while. I'm not sure if the fan hasn't been on because I put a right side scoop on, or if the fan is out causing the engine light to be on. How can I check the fan other than letting the bike idle till I think the fan should come on? Thanks for the help!
Top of pagePrevious messageNext messageBottom of page Link to this message

Cereal
Posted on Tuesday, April 24, 2007 - 11:45 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Did you check the error code yet?
Top of pagePrevious messageNext messageBottom of page Link to this message

Gentleman_jon
Posted on Tuesday, April 24, 2007 - 11:52 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

The shop manual gives the technique of checking error codes, and it is covered in the Knowledge Vault as well.

However, if you have reason to suspect the fan is not working, or may have shorted, the first thing to do is to check the fuse box, which indicates which circuit the fan is on.

If that doesn't show anything, you might check the rest of the fuses.

If that doesn't show anything, it is time to check the error codes.

Basically, you jump two wires in a dedicated grey plug, and then count the number of times the engine light blinks.

I forget the rest of the details, but it is pretty straightforward. Even a caveman could do it, ( with a bit of practice).



Good luck.

(Message edited by gentleman_jon on April 24, 2007)
Top of pagePrevious messageNext messageBottom of page Link to this message

Olinxb12r
Posted on Wednesday, April 25, 2007 - 01:41 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

I've checked everything short of the error codes. I was wondering if I can trick the fan in to coming on. I guess I need to find a manual and check the error code. The bike is running great, but I'm thinking something is up with the fan. It should at least be coming on when I shut the bike off. Luckily it has been really cool in KC. I wouldn't even be riding it if I hadn't wrecked my car last week. I have to get to work, so the bike is still in service.
Top of pagePrevious messageNext messageBottom of page Link to this message

Gowindward
Posted on Wednesday, April 25, 2007 - 05:08 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

James, You could disconnect the fan from the main wire harness and jumper a couple of wires from the battery terminals to the fan plug. If there is nothing wrong with the fan it should spin right up with 12v applied to it. The connection should be under the seat
« Previous Next »

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a private posting area. Only registered users and custodians may post messages here.
Password:
Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.)
Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration