G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Donl Posted on Wednesday, February 07, 2007 - 07:06 pm:        I`m not an electrician, but I thought that I would be able to install these with no problems since they come with instructions. However, the instructions are not well written. I need help. Does anyone know how to install these on an 07XB12?   Swordsman Posted on Thursday, February 08, 2007 - 09:54 am:        Hmm, glad you mentioned that. I was looking at buying the Signalminder shortly, and I'm also NOT an electrician. I've heard it's about a 30 minute job, but I guess that's if you know what you're doing. ~SM   Crusty Posted on Thursday, February 08, 2007 - 02:32 pm:        I had a Signal Minder on my M2, and installing it was a piece of cake. Have you tried to call Kisan? When I had a problem with my Signal Minder, they were really helpful over the phone.   Tx05xb12s Posted on Thursday, February 08, 2007 - 02:32 pm:        The tail blazer should be pretty straight forward, but I too had a little trouble with the signal minder. It took a test light to figure out which wires I needed to tap into because the instructions were vague. Shoot me a PM if you have any specific questions and I'll try and walk you through it. Also, Kisan customer service is excellent. They'd be happy to help too I'm sure.   Donl Posted on Thursday, February 08, 2007 - 06:53 pm:        Well I got everything put together last night. I bought Kellerman LEDs. They are fantastic. I`m amazed at how bright they really are. It took me about 3 hours to do everything. Not as hard as I thought it would be, but now I have two problems. The SignalMinder allows the brake light to control the duration of the turn signals, but now I need to find the break light wire to tie into the SignalMinder. Does anyone know which wire it might be? And I tried to install the springs in the turn signal control, but no such luck. I couldn`t figure out how to put them in. Anyone know how to do it?　 (Message edited by DonL on February 08, 2007)   Tx05xb12s Posted on Thursday, February 08, 2007 - 11:49 pm:        Email sent.   Donl Posted on Saturday, February 10, 2007 - 06:57 pm:        Ok I got the lights working after some trial and error. Now I have a big problem. I opened up the light switch on the handlebars to install the springs (I wasn't able to) but when I did the spring(s) that are in the high/low switch jumped out. Does anyone have a copy of the light switch diagram?

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: