G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile


Buell Motorcycle Forum » XBoard » Buell XBoard Archives » Archive through January 26, 2007 » 07 idle cable and wiring motor clearance « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Littlefield
Posted on Sunday, January 21, 2007 - 09:50 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

While I had the airbox off installing some auxiliary wiring on my 07 Ulysses I thought I'd check for clearance around the engine for the idle cable and wiring. The cable was melted a little and I rerouted it per some previous posts but the wiring included front spark plug wire looked good. There is a plastic cover securing the wiring loom up against the inside of the frame where it passes close to the engine.
« Previous Next »

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a private posting area. Only registered users and custodians may post messages here.
Password:
Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.)
Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration