G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile


Buell Motorcycle Forum » XBoard » Buell XBoard Archives » Archive through January 26, 2007 » Clipons « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

707xb12ss
Posted on Wednesday, January 10, 2007 - 01:17 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

how difficult is it to install clipons on a xb12ss and does anyone have info on what kinds.

thanks for the responses in advance guys
Top of pagePrevious messageNext messageBottom of page Link to this message

Eboos
Posted on Wednesday, January 10, 2007 - 02:54 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Woodcraft 54mm clipons would fit. They have a 2 piece clamp so you don't have to remove your top tree. However, you will have to fabricate some type of extender for the dash mounting in order to clear them. This shouldn't be too hard to do. Otherwise, if you wanted a Firebolt style bar without going with a true clipon, Crossroads performance makes a good one. It would be an easier bolt on.
Top of pagePrevious messageNext messageBottom of page Link to this message

Hogs
Posted on Wednesday, January 10, 2007 - 03:11 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Eboos, Do ya know what size the tubes are where the clip ons would connect are they 52 or 54 mm?
Top of pagePrevious messageNext messageBottom of page Link to this message

Xl1200r
Posted on Wednesday, January 10, 2007 - 03:16 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

You can also get an "Ace" or "Clubman" style bar. It's a standard bar that uses your stock handlebar clamp, but they bend down and forward and put the grips in the same place as a clip on. Because of the bend, they will clear your dash without modification. Check out Bella Corse for them. Let me see if I can get a link going...

http://www.bellacorse.com/bcc039.htm

I know these are 1" bars and you'd need 7/8". I've seen them on eBay, and I have seen a set on an XB12S as well.

(Message edited by xl1200r on January 10, 2007)
Top of pagePrevious messageNext messageBottom of page Link to this message

Eboos
Posted on Wednesday, January 10, 2007 - 04:01 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

54mm
Top of pagePrevious messageNext messageBottom of page Link to this message

Gentleman_jon
Posted on Wednesday, January 10, 2007 - 04:45 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

While it is true that one might fit "Ace" or " Clubman's" bars to a Lightning, they will not fit as shown in Xl 1200r's illustration, because the forks on the Buell are much wider than the Triumph's illustrated.

The can be mounted, but at the very least, they require some form of risers.

Here is a set of Tomasselli adjustable Clubmans preliminarily fitted to my bike with a simple riser system made from two handlebar clamps. Note that the cable runs interfere with the front screen.

I am currently having proper set of risers fabricated, and will post them in the next couple of weeks.


xxx


Bottom Line: don't plan on just buying any old set of clubman's bars and sticking them on your Lightning.

Properly fitted, they can be a very worthwhile addition.

xxx
Top of pagePrevious messageNext messageBottom of page Link to this message

Jrhottel
Posted on Thursday, January 18, 2007 - 01:21 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

My clip-on project:

http://www.badweatherbikers.com/buell/messages/327 77/252353.html?1169100798
« Previous Next »

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a private posting area. Only registered users and custodians may post messages here.
Password:
Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.)
Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration