G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Xbob Posted on Monday, November 06, 2006 - 10:23 pm:        who's powdercoated their frame and swingarm? what did it cost? what did you have to do to seal up the gas tank and oil tank?   Xbcrazy Posted on Tuesday, November 07, 2006 - 05:16 pm:        Xbob, I done mine a few times. Check out my site at www.grandstanddesigns.com for pics. Total cost from prep to powder is about $500 using a standard color powder for a frame and swingarm. Metallics and multiple powder applications get more pricey. Contact me if you need more info. Pete   Xbob Posted on Tuesday, November 07, 2006 - 05:46 pm:        thanks. ill email you with some ques.   Daveinm Posted on Tuesday, November 07, 2006 - 07:50 pm:        I powder coated my swing arm. Did it myself at my neighbor's. Powder coating system is $100. All you need is an oven(don't use your kitchen oven), a compressor, and a sandblaster. I cleaned the oil out of the swing arm and removed the bearings. Other than that, it was just like powder coating anything else. I'd be happy to answer any other questions, can't help you with the frame though.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: