| Author | Message | ||
     Jerseyguy |
Yeah ...... Anthony knows I'm faster so he decided to turn his ride over to me .....   | ||
| Josh_cox |
Anthony, It looks like we toasted our bodywork in the same two places. We've done some mods to try fixing that. I'll let you know how they work after this weekend. Jerseyguy, Your looking NICE on there man. What did you think of the bike? Looks like you were hauling there the pic. | ||
| Jerseyguy |
Josh - It felt really good. The seating position was perfect. I was imagining what it would be like at 180 on the banks of Daytona ..... Man, I would love to experience that ...... | ||
| Brineusaf |
Awesome pics.. | ||
| Mutation_racer |
JOSH thanks alot im thinking of cutting the bodywork nice and neat were it hits what your idea | ||
| Josh_cox |
We used Thermotec copper header rap and Thermotec stick on heat barriers on the fairing. The header still touches toward the rear of the fairing and gets hot, but doesn't cook the gel coat or decal now. In the front, it didn't burn anymore either. We are cutting the front burn out though to hopefully move some air through the area for additional cooling. | ||
| Mutation_racer |
josh thanks man thats just what i'll do . near the rear i have a bracet from my 12r that i'll use to space it out thanks again | ||
| Josh_cox |
Could you send me a photo or schematic for that bracket and where it attaches? I'd like to get one made for safe measure. | ||
| Mutation_racer |
on the frame there is a tab for the plastic that incases the engine thats were i'll attach it | ||
| Jerseyguy |
Ant - Do a good job bro - I don't want you messing up my bike.  | ||
| Mutation_racer |
Not a problem |
