| Author | Message | ||
     Bigsherm9r |
...without breaking it? Just prying it doesn't work, no matter how carefully. Going to mount some LED's in the mirror for turn signals. | ||
| Buellman39 |
I don't know without looking at it, but that is a great idea. | ||
| Samiam |
Yeah I was thinking of trying something similar recently, but in the front of the mirror, but ran into the same problem. Good luck. | ||
| Mesafirebolt |
Crash the bike, I Guarantee it will come out!(experience) ROFL. Seriously, it just pops out, try deforming (bending)the corner out to get at an edge, then stick a popsicle stick in it, so it wont break, and work it out. (Message edited by mesafirebolt on September 06, 2006) | ||
| Hogs |
I wd. think perhaps IF ya took a heat gun or perhaps a hair dryer although that might not be hot enough and preheat the glass areas to soften the glue in behind MIGHT help.. don`t know of any other way. | ||
| Bake |
Take them to an auomotive glass business, bet they can remove and install. | ||
| Bigsherm9r |
Thanks for the suggestions, but none of these work, I tried them all previous to this post (including the glass shop). Any more ideas? I know someone has done this before. Sherm (Message edited by bigsherm9r on September 06, 2006) | ||
| Ralphwedge |
After you break the mirror send me a pm and I will sell you my perfectly good take off mirror 2007 XB12s | ||
| Ralphwedge |
After you break the mirror send me a pm. and I will sell you my perfectly good take off mirror 2007 XB12s | ||
| Bigsherm9r |
bump | ||
| Midknyte |
they appear to be short stalk though http://www.speedzilla.com/buellxbr.shtml  | ||
| Samiam |
Nice one Midknyte, that's almost exactly what I was going to try to make. Someone beat me to it I see... Sam | ||
| Mesafirebolt |
has anyone ever checked to see if any other sportbike mirrors fit into the XB holes? Just a thought |
