|Posted on Sunday, August 27, 2006 - 04:31 pm: ||
Need some help I changed out the XB9R to the S model foot pegs. The problem is I cant get the brake pedal low enough.
So my question is the brake pedal or the rear master brake the same on both models?
Or do I need something else?
|Posted on Sunday, August 27, 2006 - 08:11 pm: ||
There is adjustment for both the brake and gear change.If you need more adjustment for the brake, you will have to cut off about 1/4" of thread with a Dremel. When I put the S pegs on my XB12R, I got enough adjustment, although the brake screwed rod was at its limit.