G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile


Buell Motorcycle Forum » XBoard » Buell XBoard Archives » Archive through July 17, 2006 » XB12S v. XB9SX « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Coastie
Posted on Sunday, July 16, 2006 - 03:32 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

My last topic was archived
http://www.badweatherbikers.com/buell/messages/32777/212820.html?1153077991

I test rode an XB9S last week. I liked the handling and the overall look of the bike.
My concerns were a lack of power and the slow rev feel.

It was recommended I look at an XB12S instead.

I have been doing some reading on the XB12S, and from what I can gather there may be 2 main differences between the 9 and 12.

Unfortunately my local dealer does not have a XB12S to test ride.

Can those who have ridden both please answer the following.

Does the 12 vibrate more at idle/low RPM more then the 9

Does the 12 rev slower then the 9


As I noted in my above impression, I thought the 9 spooled up rather slowly, if it is even worse on the 12, that could be a problem.

The vibration on the 9 was manageable, but I would not want to accept much more then that.

(Message edited by coastie on July 16, 2006)
Top of pagePrevious messageNext messageBottom of page Link to this message

Nasty73z
Posted on Sunday, July 16, 2006 - 03:49 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

It definately revs slower, but it makes more power. Couldn't tell ya about the vibrations though.
Top of pagePrevious messageNext messageBottom of page Link to this message

Brucen
Posted on Sunday, July 16, 2006 - 04:03 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

I took test rides on both before buying my XB12Ss. The 12 does vibrate more than the 9. I also was a little concerned about this, but the engine mounts do a good job of isolating the vibration. I quickly got used to the vibration that came through the mounts. There is some vibration while moving, but I don't find it objectionable.

Bruce
Top of pagePrevious messageNext messageBottom of page Link to this message

Metalstorm
Posted on Sunday, July 16, 2006 - 04:06 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

With the race kit it spools up pretty fast. When mine was stock I never touched the rev limiter & now with the kit I can't seem to stay away from it.

A 12 does vibrate more than a 9 at idle definitely more at low rpm. At 2500-3000 rpm it smooths out nicely but below that it "feels" a little rough. If you're poking along in 1st gear at sub 20mph speeds it can be ever so slightly herky jerky. Use of the clutch can eliminate that.

A 9 is (I can only go by the 9's that I've ridden) is much smoother at low rpm.

My choice was an easy one. I don't ride in traffic much. Maybe 10-15 minutes a day at best. I live in a very rural area with nothing but twisty back roads for miles & miles so a 12 was the obvious choice.

If I had to commute in heavy traffic every day of my life I would have chosen a 9SX or a 9R. Smooth in traffic & plenty fun enough in the twisties. They just require a little more shifting is all.

If I was to get a 9 today I would invest in the filter, race ecm & a Micron system. Then it would be a 9 with almost the same power as a stock 12.
« Previous Next »

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a private posting area. Only registered users and custodians may post messages here.
Password:
Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.)
Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration