G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Retiredmxer Posted on Friday, July 14, 2006 - 09:15 pm:        Hi everyone I've recently picked up a 2003 Firebolt that's in some need of repair. I'm in the process of pulling the engine, but can't seem to get the bolt in the swingarm pivot to come all the way out. It will slide about six inches out and then it seems the end is too large to pull all the way out. I've looked in the service manual and I didn't see anything mentioned other than 'remove the pivot bolt'....lol Could someone shed some light on this for me? Thanks very much, Blake M   Retiredmxer Posted on Saturday, July 15, 2006 - 01:24 am:        Sorry...guess this is the wrong forum. I've moved it to the 'Knowledge Vault'   Brineusaf Posted on Tuesday, July 18, 2006 - 01:52 am:        bump   Diablobrian Posted on Tuesday, July 18, 2006 - 01:39 pm:        It can be a pain to get that bolt out if there is ANY bind on it. A little patience goes a long way.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: