G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Woolf Posted on Tuesday, July 04, 2006 - 10:34 pm:        Hey guys, Just traded in the 04' GSXR600 for the XB12s. I have wanted one for quite sometime, but never found the right deal. I want a loud exhaust that sounds as close as possible to an HD. I think the D&D would be my best fit, but can't justify the cost right now so I am going to get the Jardine. Where is the best place to get one. When I say best, I want cheap and good customer service. Also, close proximity to Detroit would be nice also. Thanks guys.   Nasty73z Posted on Wednesday, July 05, 2006 - 02:52 am:        Hit up Dave at Appleton H-D. He is a sponsor on the board, check the sponsor section. It is less than $250 I think. If not, I have another source but try him first, he's a great guy. BTW, I have the Jardine on my bike and really love it. Super huge weight savings and a great price. Very noticable power difference too! Best bang-for-buck pipe in my opinion, even though you have to repack it every 5K miles or so. Will be installing my race ecm and open airbox kit this weekend to further compliment it. (Message edited by Nasty73z on July 05, 2006)   Ride365 Posted on Wednesday, July 05, 2006 - 03:15 am:        I'm not all that exhaust savvy, what exactly is involved the 'packing' process?   Nasty73z Posted on Wednesday, July 05, 2006 - 03:36 am:        Drilling the rivets on the can out, pulling out the fiberglass-type filling and replacing it, then riveting the end cap back on. Maybe a 20 minute process total.   Woolf Posted on Wednesday, July 05, 2006 - 05:38 am:        Appreciate it   Daves Posted on Wednesday, July 05, 2006 - 07:10 am:        I have them in stock 1-866-757-1761 ask for Dave in the sales dept   Eric_m Posted on Wednesday, July 05, 2006 - 09:07 am:        http://www.parts411.com/acb/showprod.cfm?&DID=9&CATID=61.0&ObjectGroup_ID=3529 $230 for the aluminum.   Ride365 Posted on Thursday, July 06, 2006 - 05:12 am:        Hmmm interesting, sounds easy enough, anyone know about how much it costs for the material to repack it? Thanks...   Kdan Posted on Thursday, July 06, 2006 - 05:22 am:        I paid $9 for a big bag at an offroad cycle shop. Probably last me for 4 years at the rate it's going. I have a Kerker on my Blast.   Ride365 Posted on Thursday, July 06, 2006 - 12:19 pm:        Any special tricks to the 'repacking' process or just cram new material in there?   Bads1 Posted on Thursday, July 06, 2006 - 12:22 pm:        Pull the baffle out the end of the muffler rewrap with a new piece of material and some masking tape at both ends to hold it on while you feed it back in the muffler.   Ride365 Posted on Thursday, July 06, 2006 - 12:25 pm:        Kool! Thanks folks!

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: