G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Henrik Posted on Wednesday, June 28, 2006 - 02:11 pm:        Can anyone with an XB-R do me a favor and measure the spacing between the mounting bolts. Center-to-center if possible. Thanks Henrik   Hogs Posted on Wednesday, June 28, 2006 - 04:21 pm:        Hey Henrik, Well with my eye and tape in hand I see 1" @ 1/16 ,Thought must be a better way,Got my Dial Indicaters out to check I wd. say 1 inch and a Hundred thousands, Guess my eye was Not too BAd still ( with glasses ) :-) Of course center to center,These are the two small mounting studs with the mirrors that Nut from the inside Correct??   Henrik Posted on Wednesday, June 28, 2006 - 08:49 pm:        Thanks Chris. I appreciate you taking the time. Only 1" bolt spacing eh ...? Well that blows that idea out of the water The S2 mirrors have a 1 2/3" spacing approximately. I had wild ideas of swapping the somewhat short S2 mirrors with saggy mirror boots for the XB-R long stalk mirrors - I'd like to see more than my elbows Thanks again.   Hogs Posted on Thursday, June 29, 2006 - 05:18 pm:        Anytime Henrik, Glad I could help, Could ya not just drill another hole and still mount what you are trying to do?

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: