G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Hogs Posted on Wednesday, May 10, 2006 - 06:04 pm:        HEy Guys, Just putting the header back on and I know many have had plms. with striping or Breaking the studs, I know not to go crazy on em ,Thats not a plm... The book calls for 72-96 inch lbs.... I think I remember that this was way too much not sure, IF ya can let me know what you all have been doing I wd. appreciate it big time Thanks...!   Hogs Posted on Wednesday, May 10, 2006 - 08:04 pm:        NEver mind I torque them to 85 and I think I will leave well enough alone seems ok there...   Wardog3187 Posted on Wednesday, May 10, 2006 - 08:24 pm:        Don't be like me and try to torque them to 72-96 foot lbs! I was surprised that I didn't break the stud or strip it out.   Davo Posted on Wednesday, May 10, 2006 - 09:55 pm:        That is only 6-8 ft/lbs and that is not very tight but it should be plenty tight enough.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: