| Author | Message | ||
     984gasm |
can anyone tell me if the rear axle pinch is reverse thread for some reason, or is mine just froze? any idea how to get it off if is froze? Thanks | ||
| Socalbueller |
standard thread | ||
| Firewhirl |
Mine was frozen also. Apply some heat with a propane torch to the thread area that will break it loose. | ||
| Spike |
Standard thread, must be frozen. Might want to try PB blaster or some other penetrating lube before putting heat on the painted swingarm. | ||
| Vaneo1 |
puts some balls into it! | ||
| Kdan |
Try an impact driver. The kind you hit with a hammer. That's what I had to use to get one of my front Pinch bolts off. |
