G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile


Buell Motorcycle Forum » XBoard » Buell XBoard Archives » Silicone gasket in a tube. « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Kurosawa
Posted on Monday, May 01, 2006 - 08:27 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

I went to order a chaincase gasket (and others) online and got a notice they were only sold through local dealers, and one of them was over $20. So I was in Walmart and bought a tube of 650-degree silicone gasket in a tube. Before I use it, I want to ask how well this has worked out for others here.
Top of pagePrevious messageNext messageBottom of page Link to this message

Interex2050
Posted on Monday, May 01, 2006 - 08:37 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

I have not tried the 650 degree one, but I used to swear by the PERMATEX ULTRA COPPER ® Hi - Temp RTV Silicone Gasket Maker.
http://www.accessconnect.com/gasket_maker_.htm
That stuff is incredible, its great for almost anything that can require a seal/gasket. I have used it in anything from engine cases to sealing gaps between headers and H-boxes... not to mention it dries quickly.
Top of pagePrevious messageNext messageBottom of page Link to this message

Diablobrian
Posted on Monday, May 01, 2006 - 09:12 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

I'd go with type 2 non-hardening permatex on your old gasket if you don't want to pop
for a new one. Old trick we used in the navy when we were out at sea.
Top of pagePrevious messageNext messageBottom of page Link to this message

Kurosawa
Posted on Monday, May 01, 2006 - 09:42 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Thanks for the advice! I'll head over to my local Carquest tomorrow morning and see what they have.
Top of pagePrevious messageNext messageBottom of page Link to this message

Rocketman
Posted on Monday, May 01, 2006 - 10:09 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

This is the best gasket maker in the world.



Wynns
GASKET
MAKER
Wynn’s Silicone Gasket Maker is a low volatility, high
temperature silicone adhesive sealant. It is especially
designed for vehicles with oxygen sensors and catalytic
converters. It forms an instant leak-proof gasket on all
engines, it seals windscreens, light housings, rubber hose
connections and insulates wiring.

Properties
• Self curing, silicone based adhesive gasket.
• Forms gaskets for sealing metal components.
• Non-conductive insulator.
• Bonds to wood, glass, metal, ceramic, plastic, rubber, concrete.
• Chemically resistant to oil, transmission fluid, anti-freeze, diesel fuel,
lubricants, water and steam.
• Shelf life exceeds one year.
Applications
• All metallic assemblies (eg. oil sump, water pump, hose outlets, valve cover,
timing gear cover, thermostat housing etc.)
• Wiring looms.
• Suitable for sealing windscreens, light housings and rubber hose
connections.
• Sealing leaks.
Directions
Clean surfaces thoroughly. Remove cap and unscrew aerosol valve; depress
side arm to regulate product flow. (For temporary surfaces, apply a light coat of
oil to uncoated surfaces, then assemble.) Clean excess with a knife or nonflammable
cleaning fluid. Sealant is fully cured in 10-12 hours.
Curing – cure progresses inward from the surface. At conditions of 25oC and
50% relative humidity, a tack-free skin forms within 20 minutes. Cure time is
affected by relative humidity, degree of confinement and cross-sectional
thickness of the sealant. Moisture reduces cure time.


Rocket
Top of pagePrevious messageNext messageBottom of page Link to this message

Interex2050
Posted on Monday, May 01, 2006 - 10:15 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Classy stuff, I will have to try it out one of these days...
Thanks Rocketman
Top of pagePrevious messageNext messageBottom of page Link to this message

Diablobrian
Posted on Monday, May 01, 2006 - 10:39 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

I've seen other brands, but I've never seen Wynn's. If it's that good, I'll have to give it a try.
Top of pagePrevious messageNext messageBottom of page Link to this message

Jackbequick
Posted on Monday, May 01, 2006 - 10:59 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Kurt,

Try any H-D dealer and ask for the new metal gasket for the Sportsters. That gasket is same one Buell uses, is much easier to mount than the old paper ones, and can be reused several times or more.

I'm not sure about the price on them but I think I got one for only a few Bucks or so.

Jack
Top of pagePrevious messageNext messageBottom of page Link to this message

1stbuell
Posted on Tuesday, May 02, 2006 - 12:00 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

I was just about to post a similar question when I happened on this. What a great site! In my 3 months of being a Badwebber, I have either been able to find the answer or have had every question answered. This is the Wells Fargo of motorcycle intelligence.
Top of pagePrevious messageNext messageBottom of page Link to this message

Interex2050
Posted on Tuesday, May 02, 2006 - 12:04 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Few bucks for a gasket?
Wow... I remember back in the day of my CX
a set of gaskets set me back $150 or so...
Thats why I used to swear by that stuff...
Top of pagePrevious messageNext messageBottom of page Link to this message

Rocketman
Posted on Tuesday, May 02, 2006 - 06:39 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

I've used the Wynns for a few years now. They've recently uprated the nozzle and it works great.

I use it quite often, as you can imagine, and it does seem to last, even in trade use, for ages.

I emptied a tube a couple of weeks ago. Been intrigued by the method it comes out of the tube, I cut the empty open. I was amazed to find the empty was bone dry, not a drop left inside anywhere.

About £10 in the UK.

Rocket
Top of pagePrevious messageNext messageBottom of page Link to this message

Dano_12s
Posted on Tuesday, May 02, 2006 - 07:04 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Yamabond4 works great from yamaha.Sounds the same as Wynns.Don't know where Wynnns is aval. in U.S.
« Previous Next »

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a private posting area. Only registered users and custodians may post messages here.
Password:
Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.)
Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration