G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Stretchman Posted on Saturday, April 29, 2006 - 06:32 pm:        Does anyone know the size of the base that is threaded for the mirrors? I'd like to get some short stems and them in instead of out. I have seen people using the bike mirrors instead, but I'd like to fill the stock holes if possible. TIA Stretch   Diablobrian Posted on Saturday, April 29, 2006 - 06:45 pm:        10x1.25 iirc. the r has plastic plugs in place from the factory. They should only cost a few cents, your local hardware store may even have something that will fit. And it was not a stupid question. (Message edited by diablobrian on April 29, 2006)   Stretchman Posted on Saturday, April 29, 2006 - 07:05 pm:        is that 1o mm metric ?   Diablobrian Posted on Saturday, April 29, 2006 - 07:36 pm:        yes 10mm x 1.25mm   Stretchman Posted on Saturday, April 29, 2006 - 07:43 pm:        cool. thanx.   Ctyxrnr Posted on Sunday, April 30, 2006 - 12:58 am:        the only stupid question is the one not asked.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: