G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Xblake Posted on Wednesday, April 05, 2006 - 01:02 pm:        Does anyone have any experience with using a PC II for an x1 or M1 on an 03 or newer xb9/12? Does it work properly, have the same connections? It seems that i have been reading post after post about similar topics but have found no definite answer. I would really like some help here. thanks   M1combat Posted on Wednesday, April 05, 2006 - 01:16 pm:        It works fine . You'll need the Hi-Po O2 sensor. You'll need to tap into the TPS with one of the wires from the PC. It NEEDS to be dyno tuned. Read the entire online manual at powercommander.com and pay particular attention to Pg. 17 (or 14?) of said manual. It describes an area known as "the box". Take heed or it won't work well. Make SURE you're dyno guy understands the box. Make SURE that your AFV is settled when you begin tuning. Once you pull the bike off, go settle the AFV again and then put it back on the dyno and check some stuff out to make sure you're good and your AFV didn't creep while it was on the dyno being tuned. Use the "1" setting for enrichment when you tune. BTW... The K&N PCII's are actually PCIII's. They were badged in-correctly by K&N. All that said... I'd recommend the Direct link software from Dave or Al over the PC.   Skully Posted on Wednesday, April 05, 2006 - 01:30 pm:        Hey Blake, I have a PCIII with a hi-performance O2 sensor that I will make you a deal on... Keith   Xblake Posted on Wednesday, April 05, 2006 - 02:13 pm:        Thanks for the Info... I am currently going to MMI in orlando and everyone says wonderful things about them SO i thought that i would try it out... Thanks again. Keith send me a PM with the info on that PC III (Message edited by xblake on April 05, 2006)   Blake Posted on Wednesday, April 05, 2006 - 05:42 pm:        Another Blake. Cool an XBlake, the new shorter wheelbase, higher performance, better handling Blake? Welcome!   Xblake Posted on Wednesday, April 05, 2006 - 10:20 pm:        thanks blake and yes all of the above. J/k...   Diablobrian Posted on Wednesday, April 05, 2006 - 10:52 pm:        Xblake, you do know that the pc set-up is now a generation behind current tech right? The Direct-Link is the latest and greatest. It re-programs the ECM itself so it more dynamic than the pcIII. This is especially true if you have access to a dyno (say at MMI) and can take the time to really fine tune the ECM   Buellgirlie Posted on Thursday, April 06, 2006 - 12:29 am:        i just pulled one from my racebike because it was conflicting with my race ECM. want to buy it? you'll need a TPS reset and some dyno tuning. PM me if youre interested D   Sinatra Posted on Thursday, April 06, 2006 - 09:02 am:        i also have a brand new pc2 / pc3 for sale if anyone wants it...i am going the direct link route also......pm if your interested in the pc....

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: