G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Deadmeat Posted on Wednesday, February 05, 2003 - 11:54 am:        Hi all can someone please tell me if Sportster/buell(read pre. XB9) engine and transmission sprocket fits my Bolt?   Court Posted on Wednesday, February 05, 2003 - 11:57 am:        WHAT1 . . precisely . .do you want to fit to WHAT2 ?   Deadmeat Posted on Wednesday, February 05, 2003 - 01:49 pm:        OK sorry for my bad english Im looking for parts to my XB9R Firebolt Engine sprocket 35T or 36T from exampel a X1 replacing my 34T. And if i can use a transmission chain sprocket from a sportster   Roc Posted on Wednesday, February 05, 2003 - 02:13 pm:        Engine sprocket - 35T S1 parts book, part number 40235-89. Firebolt engine sprocket - 35T XB9r parts bookpart number 40241-02. This is the part that connects the engine to the clutch basket by use of the primary chain. The S1 is probably the same as a Sportster. My parts book says the XB has 35 teeth as is.   Deadmeat Posted on Wednesday, February 05, 2003 - 03:57 pm:        I saw that, but in my user manual(side E15) it says XB Have engine: 34T clutch: 57T (1,68-1 ratio) and on a S1 (checked on a friends bike) Engine: 35T Clutch: 56T (1,6-1 ratio) I just want to know if the "old" 35T sprocket can be used in my Firebolt getting a 1,63-1 ratio. I do not want to buy a engine sprocket and find out the hard way that it not fits due to mechanical reasons. (hopefully you can understand my question because my dictionary runs hot here   Jadow Posted on Wednesday, February 05, 2003 - 05:37 pm:        My 2 cents: I went the other way. XB 34T and clutch to my M2 The sprocket fit perfect BUT the XB mounts on the Charging Rotor with 8 bolts the 35T motor sprocket has only 4 holes. I think the extra bolts are for security at 7200!   Deadmeat Posted on Wednesday, February 05, 2003 - 05:45 pm:        THANKS!! you have a golden star in my book now... Did you take the hole XB clutch or just the hub??   Jadow Posted on Wednesday, February 05, 2003 - 10:46 pm:        The Whole Clutch! It was an experiment to improve my 00M2. So far the jury is out on the results. Cost was too high to reccomend unless you blew your clutch and need the whole assembly. then it is close to stock price. Good luck on your gearing. I just might put the 2K 35T front sprocket just to see or feel the difference. But had to put the whole XB assembly for comparison.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: