G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Dbf Posted on Friday, March 10, 2006 - 06:04 am:        I'm planning on re-routing the puke tubes on my Ss to get them out of the air box. Can someone confirm the inside diameter please. I'm sure they are 3/8, but I want to make certain. Cheers,   Hogs Posted on Friday, March 10, 2006 - 07:33 am:        Hey DBF, I`m 99 PErcent sure you are correct...But I remember I was wrong once before ...   Jackbequick Posted on Friday, March 10, 2006 - 09:50 am:        They are 3/8", you want the 30R7 black rubber fuel line with the braid in it. It is usually marked "Not for fuel injection". Jack   Dbf Posted on Friday, March 10, 2006 - 11:20 am:        Thanks Chris and Jack. I already have enough 3/8 fuel hose in my shop to make this work. Just wanted to be sure before I started. I just need 2, 3/8 tees, a length of clear 3/8 hose, some kind of a drain kock and maybe a little k&n style vent filter. What should I use to plug the holes the tubes used to be routed through? Rubber grommets? Chris, if it's fine and dry tomorrow, we should go for a burn.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: