G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile


Buell Motorcycle Forum » XBoard » Buell XBoard Archives » Battery... « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Cataract2
Posted on Thursday, March 09, 2006 - 03:46 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Well, went to start the bike today. Turned the key on. The lights were shining strong. Hit the starter and it turned over once then heard the normal clicking of the starter. This of course tells me battery is low.

My bike was only sitting for 2 days. What get's me is the lights were shining strong. I'm guessing the AMPs for the battery were low. Is this normal? The voltage is good but the AMPs aren't? The battery is almost 2 years old which I know the life expectancy is about that long for them.
Top of pagePrevious messageNext messageBottom of page Link to this message

Cataract2
Posted on Thursday, March 09, 2006 - 03:58 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Checked the battery with a voltage meter. 12.39 volts. In the manual that stats that it's only at 50% charge. Could this be a sign that the voltage regulator is going or that the battery is going. Also, what ways are there to check the voltage regulator to see how it's doing?
Top of pagePrevious messageNext messageBottom of page Link to this message

Gowindward
Posted on Thursday, March 09, 2006 - 04:06 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Ryan, I had the same thing happen to me a couple weeks ago. Came out from work and the battery didn't have the beans to get the bike started. I had to jump start it. Went home checked everything out, and snugged the battery terminal connections down and put it on the charger over night. I wouldn't have called the connections loose, but I haven't had a problems since (Knock on wood) You might take a look for any wiring that is grounding out and causing a drain on the battery. To test for something like that you can check and see if there is any current being pulled from the battery when everything is off.
Top of pagePrevious messageNext messageBottom of page Link to this message

Cataract2
Posted on Thursday, March 09, 2006 - 04:14 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Well, looks like the battery is bad. My charger just gave a fault warning on it telling me it's dead. Sigh... Off to Wal Mart I guess...
Top of pagePrevious messageNext messageBottom of page Link to this message

Aldaytona
Posted on Thursday, March 09, 2006 - 04:21 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Ryan, stop guessing, Signal Dynamics has a Heads-Up voltage monitor and it's only 20 some odd dollars. It installs with only 2 wires and even has a remote LED option. I have them on my Buells and can always see the condition of my charging system. You'll like it!
Top of pagePrevious messageNext messageBottom of page Link to this message

Cataract2
Posted on Thursday, March 09, 2006 - 04:30 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Thanks Al. I'll look into that. Any link to their site?
Top of pagePrevious messageNext messageBottom of page Link to this message

Aldaytona
Posted on Thursday, March 09, 2006 - 04:41 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Ryan, www.signaldynamics.com, their Back Off brake light module keeps the "mindless masses" in cages off of your *arse as well, money even better spent as well.

*thanks to our brothers across the pond
Top of pagePrevious messageNext messageBottom of page Link to this message

Gowindward
Posted on Thursday, March 09, 2006 - 04:55 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

I put one of these digital voltmeters on my bike.

http://www.digitalmeter.com/cgi-bin/webshop.cgi?config=configspc.txt&uid=yimcmwo b114194118671&command=link--bikemeter
Top of pagePrevious messageNext messageBottom of page Link to this message

Cataract2
Posted on Thursday, March 09, 2006 - 06:02 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Ok, little more. I got the battery charged up enough to start the bike. It's now at 12.55 volts. I ran the engine up to 3500-4000 rpm. The battery is receiving 13.00-13.50 volts. This would seem to be within spec for the voltage regulators output. I'm guessing the battery is on it's death bed.
Top of pagePrevious messageNext messageBottom of page Link to this message

Midknyte
Posted on Thursday, March 09, 2006 - 06:04 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Hey Al,

That Signal Dynamics has a Heads-Up voltage monitor - how does it hook up? Straight to the battery?
Top of pagePrevious messageNext messageBottom of page Link to this message

Reepicheep
Posted on Thursday, March 09, 2006 - 07:43 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Is it hard to get to the stator plug on an XB? It was easy on a tuber.

Get it running, put your meter on AC, and see what the voltage is. That would be an icing in the cake data point.
Top of pagePrevious messageNext messageBottom of page Link to this message

Freyke
Posted on Thursday, March 09, 2006 - 07:51 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

2-3 years is about all you'll get out of a typical bike battery... If you ride often and you start to hear the dreaded lugging/slow rrr-rrr-rrr-click,click,Plooom, bap - start... Then it's time to start thinking about a new battery... Measuring volts (with no load) does not always tell the whole story.... Otheriwse, it would be possible to start your bike w/6 AAA batteties (2.133 VDC X 6 Cells)... Ohm's law baby....
Top of pagePrevious messageNext messageBottom of page Link to this message

Cataract2
Posted on Thursday, March 09, 2006 - 08:29 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Thanks Frey. Well, got a new battery from wally world (aka Wal Mart). Going to charge it up tonight and test it tomorrow.
Top of pagePrevious messageNext messageBottom of page Link to this message

Alstroker
Posted on Thursday, March 09, 2006 - 09:07 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Can you get a battery for the xb at Wal-Mart? Mine is bad too. What is the cross reference number?
Top of pagePrevious messageNext messageBottom of page Link to this message

Cataract2
Posted on Thursday, March 09, 2006 - 10:15 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Everstart ES14BS at Wal Mart.
Top of pagePrevious messageNext messageBottom of page Link to this message

Diablobrian
Posted on Friday, March 10, 2006 - 12:11 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

the plug for the stator is in front of the drive sprocket behind the plastic cover on the right side of the motor.
It isn't too hard to get to. There are several connectors hidden there.
Top of pagePrevious messageNext messageBottom of page Link to this message

Sik_s
Posted on Friday, March 10, 2006 - 12:17 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

I clicked the first link I found for the stock XB battery and the first link for the Wal*Mart battery, and it was $65 to $90. Sounds like the H-D battery is the better deal unless you don't have a dealer within a reasonable distance.
Top of pagePrevious messageNext messageBottom of page Link to this message

Aldaytona
Posted on Friday, March 10, 2006 - 07:13 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Midknyte, One ground and one switched hot wire, it's that easy. One 1/4" LED that changes color to indicate state of charge, no dial or readout to quit working. Their Back Off brake light module is a one wire installation, add a male and a female spade connection to their unit and unplug the Buell brake light female spade and put the module in series and you're done, no cutting or splicing.
Top of pagePrevious messageNext messageBottom of page Link to this message

Midknyte
Posted on Friday, March 10, 2006 - 10:52 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Thanks Al.

Ok, color me stupid, but where on my [9R] could I find a suitable switched hot wire? First thought that comes to mind is the headlight - it's right there under the faring and super easy to get to, but I'm wondering if the current draw across that line makes in innapropriate...
Top of pagePrevious messageNext messageBottom of page Link to this message

Perry
Posted on Friday, March 10, 2006 - 11:45 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

In looking at the Signal Dynamics Heads up thing, it seems like the voltage ranges are wrong.
The voltage chart seemed to show it would show green for 12-15 volts. If you are seeing 12.1 with the engine running you are in trouble, no? Seems like the range is too big for the green. By the time it reads amber you are already below 12 volts. This would be good to show you when your charging system dies suddenly, but not a good indicator of a weak/dying battery or drawing too much power from accessories.
Am I missing something on this?
Top of pagePrevious messageNext messageBottom of page Link to this message

Creeater
Posted on Friday, March 10, 2006 - 12:01 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Gowindward, which one did you get. 1/10 or 1/100 volt resolution
Top of pagePrevious messageNext messageBottom of page Link to this message

2k4xb12
Posted on Friday, March 10, 2006 - 01:25 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Ryan, That's what mine was doing when the stator went out. Pull your primary inspection cover and take a whiff. If you smell burned popcorn, and you aren't making any in the microwave, it's your stator... You should be seeing around 14V when charging.
Top of pagePrevious messageNext messageBottom of page Link to this message

Reepicheep
Posted on Friday, March 10, 2006 - 01:54 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Is the wal-mart battery absorbed glass mat?

My M2 battery lasted at least 4 years. My old yamaha would trash a battery every 18 months though.
Top of pagePrevious messageNext messageBottom of page Link to this message

Cataract2
Posted on Friday, March 10, 2006 - 03:29 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

2k4, thanks for the info. I pulled my primary and sniffed. Yup, burnt popcorn. Sigh... Seems the stator went out. Guess I gotta call the dealer and get it fixed.
Top of pagePrevious messageNext messageBottom of page Link to this message

Diablobrian
Posted on Friday, March 10, 2006 - 03:49 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

the absorbed glass mat batteries are lighter, higher efficiency, and higher
quality that the usual wet cells you get from walmart.
Be careful guys. Saving pennies can cost you dollars in the long run.
Top of pagePrevious messageNext messageBottom of page Link to this message

2k4xb12
Posted on Friday, March 10, 2006 - 04:08 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Good thing it's under warranty...
Top of pagePrevious messageNext messageBottom of page Link to this message

Cataract2
Posted on Friday, March 10, 2006 - 04:12 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Yeah, gotta like the 2 year warranty. Can't complain though. I have 27,100 miles on the bike. It lasted some time.
Top of pagePrevious messageNext messageBottom of page Link to this message

Gowindward
Posted on Friday, March 10, 2006 - 04:18 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Creeater, I'm using the 1/10th one.
Top of pagePrevious messageNext messageBottom of page Link to this message

Freyke
Posted on Friday, March 10, 2006 - 04:18 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Part of the reason for the OEM abzorbed glass mat battery is the fact that the XB batteries do not sit vetical; rather they sit almost horizontal... When the wet cell battieries are sitting in this fashion the anode and electrodes are not fully bathed in the electrolite... not to mention the fact that even though they're maintenance free, they still could leak electrolite (acid)...
« Previous Next »

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a private posting area. Only registered users and custodians may post messages here.
Password:
Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.)
Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration