G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Xxxb9s Posted on Thursday, March 02, 2006 - 09:01 am:        Hi, I'm planning to mount a X1/S1 Headlamp (by the way is someone selling a used one?) on a XB9S. It is just an idea, I was wondering if someone can tell me if the X1/S1 headlamp mounts (black clamps on the forks) are same size of XB's forks (54mm?). I've photoshopped the project using a front S1 fork+headlamp and a XB9. the idea is to put the S1/X1 headlamp and flyscreen on the XB9S forks using the stock X1/S1 clamps. Is it doable? anyone tried this before? Any advice is appreciated. Thanks! (Message edited by xxxb9s on March 02, 2006) (Message edited by xxxb9s on March 02, 2006)   Redbull Posted on Thursday, March 02, 2006 - 10:41 am:        I think the diameter is 43mm. Could be wrong, though.   Gearhead998 Posted on Thursday, March 02, 2006 - 10:54 am:        Check this thread out. Pretty sweet looking job. http://www.badweatherbikers.com/buell/messages/32777/178194.html?1141274397

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: