G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Butch_xb9r Posted on Sunday, February 19, 2006 - 02:09 am:        My low beam bulb is burned out and I noticed that the inside of the headlight is melted. I was never happy with the low beam so I'm thinking of buying a new high beam to replace my current high beam which will become my low beam. Will running dual high beams cause any electrical problems with the bike? Will my old high beam simply melt due to the wattage? Ideas?   Diablobrian Posted on Sunday, February 19, 2006 - 02:10 am:        what wattage bulbs were you running?   Butch_xb9r Posted on Sunday, February 19, 2006 - 02:21 am:        I was running the factory set up. I haven't had to mess with the headlights until now.   Lonexb Posted on Sunday, February 19, 2006 - 07:50 am:        Butch_xb9r you should NOT have a problem running 2 high beam housings on you bike. i have been doing it for over 20k miles and haven't had a problem yet. brian

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: