G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Mountainbiker90 Posted on Friday, February 17, 2006 - 09:47 pm:        I have an 04 w/a factory race ecm. The bike is in parts and i'm putting it all back together. there is one wire that is grouped w/those that connect to the ecm. it is a sole wire by itself with a female plug on it encased in a black plastic sleeve (it looks similar to the ones going to the horn). it looks like it was attached to a male connector, but i can't find one. any ideas? thanks in advance.   Fullpower Posted on Friday, February 17, 2006 - 10:04 pm:        the ECM from the XB12 has a 1/4" male blade connector in the middle between the black and grey connectors. it is for the interactive muffler servo. you may disregard that wire.   Mountainbiker90 Posted on Friday, February 17, 2006 - 10:21 pm:        thanks for the quick info. makes sense. hope to get it going tomorrow!

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: