G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Roly Posted on Saturday, February 04, 2006 - 03:01 pm:        hi i want to pull the carbon frame sliders off,do you think it will pull the paint off the frame ,,TEARS.the frame rubber pucks are going back on,do i use glue pads as supplied or silicone, any ideas thanks.   Wyckedflesh Posted on Saturday, February 04, 2006 - 04:07 pm:        Thats powder coating and not 'paint'. Just use a blowdryer/heatgun to warm the adhesive so it cleans up nicer. 3M Automotive trim adhesive sprayed onto the gluepad of the framepuck should work just fine.   Cmm213 Posted on Saturday, February 04, 2006 - 04:10 pm:        I used a heat gun on my frame pucks before sticking them on and they are on rock solid.   Buelldyno_guy Posted on Saturday, February 04, 2006 - 05:46 pm:        There is a Buell P/N for the silver XB frame paint. ... Terry   Cygnus_x1 Posted on Saturday, February 04, 2006 - 08:50 pm:        Do ya want to sell the sliders?   Roly Posted on Sunday, February 05, 2006 - 03:55 am:        hi thanks for the info, the sliders may go back on next winter for extra protection so they won't be for sale. roly

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: