G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Rhost Posted on Thursday, February 02, 2006 - 03:02 pm:        OK, so I'm looking on Renthal's site at the new streetfighter handlebars, figuring out what the differences are between them and the CR ultra lows and I run across a Buell chain conversion. http://www.renthal.com/fit-masterv3.asp?make=15&model=Chain%20conversion%20&type =34 Anyone try this? It says we need a Renthal 378 front sprocket, a 520 chain and 390 rear. They don't say anything about the idler pulley. If you could get a chain conversion idler pulley would this work, or is this for blasts and older buells.   Diablobrian Posted on Thursday, February 02, 2006 - 05:28 pm:        Could be intended for tube frames.   Trojan Posted on Friday, February 03, 2006 - 04:24 am:        This is for the Tube frame models. Front pulley would fit but not the rear.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: