| Author | Message | ||
     Cygnus_x1 |
For this set-up, where do I get them?  | ||
| Cygnus_x1 |
Is everybody out riding tonight? | ||
| Thansesxb9rs |
It is either Trojan or Hillbilly-Motors. Give Dave S a call. | ||
| Buell_892 |
I 2nd... i want that set up!!!!! Someone find out now for us, thanks! | ||
| Buell_892 |
also, i like that paint... wheel powder coated... how was it painted? Cause i want to paint my yellow plastics to black, but ive heard bad things about painting plastics... so i want to make sure its done right! | ||
| Boogman |
The tail is made by LD Composites .. do a google search .. I was looking into that also .. looks wicked .. But there about $600 aussie .. figured I could fabricate something if I wanted it that bad ... maybe daves could find out .. I know they are available in OZ ... LD composites make sweet stuff ... but for 600 .. id rather do other things .. | ||
| Cygnus_x1 |
Here is mine, I found a brake light, but just need the turn signals now.  | ||
| Tq_freak |
that looks sweet the way you have it | ||
| Stou |
I just bought some nice turn signal from American sport bike. Very nice and not expensive. You can use it for the front.  Cateye turn signal, $11.65 The url is very long, can add it to a link, I got some error when I try to post it. (Message edited by stou on January 29, 2006) | ||
| Cygnus_x1 |
Hey Stou, I bought them also, but the under tail pan has the place for the round blinkers, and no where to really put the other kinds in. And they wont pass it on the inspection without the blinkers. | ||
| Bartimus |
How about a tail-light with an integrated turn-signal? http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1,1&item=4606282750& sspagename=STRK%3AMEWA%3AIT That auction has ended, but you can go to their store and check out what they have for your bike. | ||
| Stou |
If you know the holes size, maybe you can use those kind of universals signals. http://www.imotorcyclestore.com/cgi-bin/dpsmart/products.html?L+ims+yreb6985+_DC atNum_02S23K_26SFMF_01PageType_02ML_01 | ||
| Silverado140 |
LD Composites is now known as "Laque & Deco". Check out their site for lots of cool XB stuff. http://www.laque-deco.com/page.php?u=pieces&cat2=5&cat3=39 Joe | ||
| Cygnus_x1 |
Hey Joe, they show the pan, but didnt see any info on the lights. Dang foreign sites! | ||
| Silverado140 |
I'm still looking for the lamps. You'll probably have to contact the manufacturer to get the hole sizes, or they may point you in a direction to find some. | ||
| Buell_892 |
wait, so those little cateye lights only fit the front? What are you guys doing for the back? | ||
| Djsalltrac |
CYGNUS What did you pay for that, where did you get it, and do you know what they want for the unpainted one? The carbon fiber one looks like it comes with the turn signals in it. | ||
| Stou |
Buell_892, I have cateye in front and rear on my bike. But the question here was to find turnsignals that fit on the undertaill on the picture posted by Cygnus_x1 | ||
| Cygnus_x1 |
It came with the bike, sorry, not sure how much it was or where it came from. | ||
| Buell_892 |
do the cateyes just screw right into place of the bigger stock signals? | ||
| Stou |
The only thing did is to make the rear holes a little bit bigger, something like 1/32 or 1/16 bigger than the stock holes. Al sent me some wire connectors adapter with the signals because the one that came on the signals are not the same size of the Buell connectors. At the front nothing special need. They fit right in the stock holes. | ||
| Buell_892 |
you dont have a pic of your bike with them on, do you? | ||
| Stou |
Give me 10 minutes and I'll got some for you  | ||
| Stou |
Here it is!   | ||
| Voltage_vector |
Stou, oh man that grater insert is too cool... | ||
| Peanut_man |
 | ||
| Stou |
Thanks guys! I made a plaster mold from the stock grater and did this parts in fiberglass. It's relatively easy to do. |
