G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile


Buell Motorcycle Forum » XBoard » Buell XBoard Archives » Archive through January 17, 2006 » Muller Power Clutch « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Elff
Posted on Friday, January 06, 2006 - 09:53 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

So I picked up this little Do-Hicky to lessen the force needed to engage the clutch. Sooooo after having this part for a couple of months I decided to break out the directions to see what I need to do and the first one states

1- Lift up bike (assembly stand) and take care of unharmfully requirements

WTF is unharmfully requirements???

Is that a German way of saying drain the transmission fluid?
Top of pagePrevious messageNext messageBottom of page Link to this message

Isham
Posted on Friday, January 06, 2006 - 10:15 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

hahaha. Thats all I can say sorry...
Top of pagePrevious messageNext messageBottom of page Link to this message

Diablobrian
Posted on Friday, January 06, 2006 - 10:32 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

typical translation problems. Like trying to read instructions for a surround setup that was originally in japanese. without the subtle nuances of the original language it comes across as gibberish
Top of pagePrevious messageNext messageBottom of page Link to this message

Xb9dan
Posted on Saturday, January 07, 2006 - 12:25 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

So is it any good?
Top of pagePrevious messageNext messageBottom of page Link to this message

Elff
Posted on Saturday, January 07, 2006 - 12:57 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

I have no idea
I have not started yet.
: )
Top of pagePrevious messageNext messageBottom of page Link to this message

Trojan
Posted on Saturday, January 07, 2006 - 02:31 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Here is what the instructions should be like in proper English : )

Installation Instructions: XLH & Buell Models 1994 up.

Warning! Installation should be carried out by an experienced mechanic. We will not be liable for unprofessional installation.

1. Make sure the bike is secured safely on an appropriate stand.

2. Loosen clutch cable adjuster jam nut and slacken clutch cable.

3. Remove clutch cover (There is no need to remove the primary cover) using appropriate keys, and remove jam nut and spring. Loosen adjusting screw so the OEM clutch adjusting screw can be separated from the clutch release mechanism.

4. Disconnect clutch cable from inner ramp of clutch release mechanism and remove ramp assembly.

5. Assemble the Muller Power Clutch mechanism using the new bearings and circlip provided. The locating tab of the outer ramp should be assembled so that it is directly opposite the actuating arm of the inner ramp.

6. Connect the Muller inner ramp to clutch cable and mount in clutch cover.

7. Insert clutch adjusting screw with special nut for clutch by turning it anti-clockwise. Perform basic clutch adjustment in accordance with OEM manual.

8. Unscrew adjusting screw anti-clockwise until you feel the screw seat on the clutch pushrod. Pull clutch lever to its maximum 3 or 4 times to seat the clutch release mechanism. Then loosen the adjuster screw (clockwise) for just 1/8 turn (not like the OEM ¼ turn). Important – The clutch release mechanism must have free play.

9. Mount clutch nut with spring and remount clutch cover.

10. Adjust clutch cable play using cable adjuster until free play at the lever is about 2-3mm. Tighten locknut!

11. Check function and test ride!
Top of pagePrevious messageNext messageBottom of page Link to this message

Elff
Posted on Saturday, January 07, 2006 - 02:53 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Thanks!!!!!!!

That should help alot.
Top of pagePrevious messageNext messageBottom of page Link to this message

Elff
Posted on Wednesday, January 11, 2006 - 11:52 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

That was simple.

I am amazed at the difference in the pull of the lever. I dont know if it is exactly a 40% reduction, but I do know it was worth every penny.
Top of pagePrevious messageNext messageBottom of page Link to this message

Roadrage
Posted on Thursday, January 12, 2006 - 01:15 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

How many pennies?
Top of pagePrevious messageNext messageBottom of page Link to this message

Elff
Posted on Thursday, January 12, 2006 - 09:10 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

~$160
Top of pagePrevious messageNext messageBottom of page Link to this message

Raymondt
Posted on Sunday, January 15, 2006 - 01:16 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

I had a similar unit installed during my 5000 mile service, What a huge difference. It is now about the same as the hydraulic was on my V-Max. Mine was from a different manufacturer though. I asked for a Muller and the dealer had this one in stock and recommended it so I said what the hell plus it was only a $109.95 rather than the $160.00 for the Muller. The unit is made by MRC Works great so far I have about 400 miles on it and I love it.
Top of pagePrevious messageNext messageBottom of page Link to this message

Mdm
Posted on Sunday, January 15, 2006 - 10:09 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Can some one provide a link or a picture ?

Thx,

MDM

(Message edited by mdm on January 15, 2006)
Top of pagePrevious messageNext messageBottom of page Link to this message

Elff
Posted on Sunday, January 15, 2006 - 11:19 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Go to the American Sportbike website and click through the links in the following order

Home > Buell > XB9S/XB12S > Engine/Transmission/Drivetrain
Top of pagePrevious messageNext messageBottom of page Link to this message

Skyguy
Posted on Sunday, January 15, 2006 - 01:47 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

I broke a clutch cable on my 03 9r at about 15,000 miles and replaced it with what the tech at Glandale Buell said was an updated design. The clutch pull ws reduced by at least 30 to 40 percent. Total cost 24.95!
Top of pagePrevious messageNext messageBottom of page Link to this message

Diablobrian
Posted on Sunday, January 15, 2006 - 04:42 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

skyguy: is that the 06 unit? and was a clutch spring also required?
« Previous Next »

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a private posting area. Only registered users and custodians may post messages here.
Password:
Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.)
Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration