G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile


Buell Motorcycle Forum » XBoard » Buell XBoard Archives » Archive through January 04, 2006 » American Sportbike Wave Rotor « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Truk
Posted on Saturday, December 31, 2005 - 06:10 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Having some problems with the front brake rotor on my 03 XB9R. Not working right under aggressive baking. Not smooth at all. Seems to grab and pulse.

Not sure if it is warped or glazed or what. I Have tightened the steering head bearing in the past, it is not that... it is something not right with the bake/rotor

Any suggestions or comments regarding the issue are welcomed

If after further investigation I conclude I need to replace it was considering the American SportBike Front Wave rotor.

Anybody have any experience with it. Looks neat, but last thing I need is for it not to work good or worse yet, warp easy
Top of pagePrevious messageNext messageBottom of page Link to this message

Xbolt12
Posted on Saturday, December 31, 2005 - 06:18 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

I went to Lyndall Racing carbon/kevlar pads from American Sport Bike and it pretty much cured my bike of the same problem. On mine it seemed to be caused by heat glazing on the rotor on the trailing edge of the cross-drilled holes-or at least I believe that was the cause because cleaning the rotor up with a cross-hatch would solve the problem for a while. Basically the Lyndalls cleaned up the surface. Also they are a lot more progressive, but require just a little more pressure at the lever. Worth trying in my opinion. Just make sure you follow the directions on seating the pads.
Top of pagePrevious messageNext messageBottom of page Link to this message

99buellx1
Posted on Saturday, December 31, 2005 - 07:25 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Try cleaning the pins really well. We've had people with that problem and we've used brake clean to spray around the pins and springs, and sometimes it works. Worth a try.
Top of pagePrevious messageNext messageBottom of page Link to this message

Truk
Posted on Sunday, January 01, 2006 - 06:06 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Thanks for the suggestions guys.. Will look into both, starting with a good cleaning.

99buellX1 - I assume you are referring to cleaning the Rotor Mount Fastners (bolts), Drive Bushings, and Front Brake Springs that hold the rotor to the wheel. And I am also assuming you mean that I clean around them while still fastened to the rotor and wheel, correct?

Can I use brake cleaner that one can get from Auto Zone? Just spray around the area and wipe clean? Excuse my ignorance, just want to be sure?

Again, thanks for the suggestions.
Top of pagePrevious messageNext messageBottom of page Link to this message

Skully
Posted on Sunday, January 01, 2006 - 07:39 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Kurt,

I had the same problem and the Lyndall's from American Sport Bike took care of the pulsing completely.

Keith
Top of pagePrevious messageNext messageBottom of page Link to this message

Mcgiver
Posted on Sunday, January 01, 2006 - 07:57 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

And, back to the question of Wave Rotors. Has anyone used them? Brian
Top of pagePrevious messageNext messageBottom of page Link to this message

Buellfighter
Posted on Sunday, January 01, 2006 - 08:26 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

I know this is a XB question but I'm currently using a wave rotor on my S1. The rotor is much thicker than stock and has no pulsating (or rattling) probs like the stocker. As far as stopping power I went from needing one finger to come to a stop to needing just a finger tip...literally.
Top of pagePrevious messageNext messageBottom of page Link to this message

Johnk3
Posted on Sunday, January 01, 2006 - 09:14 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

i have the rotor and the lyndal pads and mine pulses. I am removing it in favor of the stock.
Top of pagePrevious messageNext messageBottom of page Link to this message

Truk
Posted on Monday, January 02, 2006 - 09:08 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Johnk3 - Which do you think is giving you troubles, the wave rotor, or Lyndal pads, or both? What are you planning to remove?

Also - Can anyone explain what is meant by XBolt12 statement - "cleaning the rotor with cross-hatch"?
Top of pagePrevious messageNext messageBottom of page Link to this message

Blake
Posted on Monday, January 02, 2006 - 04:48 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

"The rotor is much thicker than stock..."

If that were true, I suspect you'd not get a new set of brake pads to install. I suspect your stock rotor was worn and thus indeed was thinner than your new wave rotor. : )
Top of pagePrevious messageNext messageBottom of page Link to this message

Buellfighter
Posted on Monday, January 02, 2006 - 05:23 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

New brake pads with the new wave rotor just barely fit. It is thicker just comparing surfaces on the rotors that don't contact the pads.
« Previous Next »

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a private posting area. Only registered users and custodians may post messages here.
Password:
Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.)
Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration