| Author | Message | ||
     Xxxb9s |
Hi, I've just installed the TFI as per manual. Very easy I have to add, when you've figured out where to place the plugs  the probl is that none of the leds seem to be alive, none of them went on when I switched the bike on or when at idle or when I revved the throttle. connected the plugs connected to the battery ground it is simply....mute. The weird thing (to me) is that the bike....is running as usual, like I didn't change anything, but I DO have changed something!! Dobeckperformance customer care kindly offered to replace it under warranty but first I want to know if anyone know what's going on (they don't have a clue...and that's is so....D'OH!) thanks! (Message edited by xxxb9s on December 15, 2005) (Message edited by xxxb9s on December 15, 2005) (Message edited by xxxb9s on December 15, 2005) | ||
| Xxxb9s |
anyone experience it with the TFI? could it be an exhausted battery (my dash watch, get reset each time I don't use the bike for too long). could it be a swapping of the two iniector plugs? (front<--->rear)? now the bike runs differently, like "something is happening down there", some hiccups (the most common sign that the TFI is running but when I stop and check TFI leds they are still switched off. I'm kinda lost thanks |
