| Author | Message | ||
     Pitcherman |
Ok. I'm brand new to this board and would like to start off by saying hi. Now that that is done I have a question that I'm sure has been answered, I just can't seem to find it by searching. I have an 03 XB9S and have been looking at converting the front and rear to the R body style. I have found some topics concerning the tail end conversion, but have not found any thing concerning the front end. Could some one post up a link or something? I know there will be quite a bit involved in this, but am not quite sure where to start. Thanks for your time. Sorry to bother you guys with a question that I'm sure has been covered more than once. Chris | ||
| 12r |
Hi Chris and welcome. The story starts here: http://www.badweatherbikers.com/cgibin/discus/show.cgi?tpc=32777&post=359987#POS T359987 and Dave Stueve at Appleton HD seems to be da man for S-to-R conversions - his details are in the Sponsor News section. Good luck ! | ||
| Taxman |
am i the only person interested in an R to S tail conversion? i wonder what the cost would be. has anyone done this? | ||
| Ronlv |
me and coyote_xb12s did a complete front and rear s to r and r to s conversion i started with a xb9r ha started with a xb12s(you can see his after pics on the paint scheme post) parts other than the obvious needed for swap, wiring harness, clutch cable, f brake line, throtttle cable,ignition switch, gas cap lock, keys, r brake resovior and hose look here also http://www.badweatherbikers.com/buell/messages/32777/128915.html (Message edited by ronlv on September 22, 2005) | ||
| Pitcherman |
Thanks for the links guys, thats what I was looking for. Looks like this will make a nice winter project. Doesn't look like it will be as hard as I thought. Now all I have to do is save money, hmmm but those engien mods look soooo cool...... Thanks again for the links. Chris | ||
| Cmm213 |
Keep an eye on ebay for part bikes some times people completely part out a bike and you can get what you need cheep. |
