G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile


Buell Motorcycle Forum » XBoard » Buell XBoard Archives » Archive through June 15, 2005 » Driveability issues on XB12S.... « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Howieshotrods
Posted on Monday, June 13, 2005 - 03:57 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

I've been having idling issues since I put the race kit in my xb12s, sometimes at start up it will idle real low (about 600) and be real erratic. Then when it gets warmed up it will run good but the idle will hang up at about 2k for a few seconds before coming back down. After I've ridden it for awhile and stop for 10-15 minutes it starts all over even when it is hot.

I was down at the dealer the other day and was talking with my salesman. He said, per Buell, that the bike needs to run through a cycle in the computer...basically you need to run the bike for 5-10 minutes or you will foul out your plugs and it won't run right until you replace them. Now I understand the bike runs rich at start up until it gets warmed up, but once it gets warmed up it should not run rich at start up, at least as far as I am concerned. To me, it seems like a temp sensor of one kind or another is not working properly.

Any thoughts, any help, this is starting to annoy me, they told me to bring it in and they would put one of their lot guys on it to ride it for a long test ride to see if they can figure it out, but would really like some ideas before I let them do it.
Top of pagePrevious messageNext messageBottom of page Link to this message

Cyko_bob
Posted on Monday, June 13, 2005 - 04:13 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Howie: Sounds like the TPS needs to be reset; the dealer can do that or you can buy a program to do it if you are compute literate. DAVES has the program...
Top of pagePrevious messageNext messageBottom of page Link to this message

Yeags30
Posted on Monday, June 13, 2005 - 06:01 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

tps reset, change the plugs to the good ones and give her hell on a openroad...some nice high rpms seems to clean out the gunk
Top of pagePrevious messageNext messageBottom of page Link to this message

Izzinya
Posted on Tuesday, June 14, 2005 - 12:23 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

tps zero and air fuel value reset

it is the answer to most runnabuility issues ive
seen

that and fouled plugs

other than that i havnt seen much with the xb's



Izzinya
Top of pagePrevious messageNext messageBottom of page Link to this message

Raymondt
Posted on Wednesday, June 15, 2005 - 12:34 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

I had the identical issue with my XB12S with the factory race kit when it was new. I rode it like this until the first service. The TPS reset, a change to the SYN3 and a idle adjustment and now it runs and idles perfect. I think the guys are right! Don't let them ride your bike. Have them do the procedure and then ride it yourself
« Previous Next »

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a private posting area. Only registered users and custodians may post messages here.
Password:
Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.)
Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration