| Author | Message | ||
     Norcalbuell |
I bought one of those cable lube tools that clamp over the cable..but how do i get the clutch cable off the lever and how do i exactly use cable luber tool?  I thought there was post showing the illustration on this... thanks in advance Chuck | ||
| Cataract2 |
You see on the cable about half way down there's a rippled cover. Move it up and loosen the cable a good about. You can then remove the clutch cable from the housing on the handle. Slip the tool over and use your choice of cable lube. I use a Honda all purpose lube. Works on cables. So far I have 8600 miles on the cable with no wear showing. Crossing fingers. BTW, recommend you getting the service manual, it will explain this better than I can. |
