G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Beache Posted on Tuesday, May 17, 2005 - 08:50 am:        I want to put a D&D on my 12r. What's the deal with this valve on the factory pipe? Every aftermarket pipe to include the factory racekits only specify they are for the 9r/9s. Can I slap one of these on my 12r?   Hogs Posted on Tuesday, May 17, 2005 - 09:11 am:        Yup go for it Youuu will like it, Just remove cable down below and stack in somewheres out of reach, out of sight , good secure location and up top unhook cable up there as well and do same as down below secured location, LEave the wires hooked up to Valve That way NO check engine light will come on and BuG ya... UNless you are installing the race ecm with it then You unhook the plug at that time..! Hope that helps and all   Hogs Posted on Tuesday, May 17, 2005 - 09:18 am:        I may add yes and I have run a D&D on a stock Xb12s/r with that being the only Modification at that time with NO worries.... NIce BArk to it.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: