G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Truk Posted on Thursday, May 12, 2005 - 11:40 am:        Potential Stupid Question Alert (PSQA) - When inspecting the primary chain tension for an XB9R, the Service Manual says to "rotate engine to move primary chain". How is this accomplished? Will the bike on a stand, in neutral and then rotating the tire accomplish this?   Davefl Posted on Thursday, May 12, 2005 - 11:44 am:        With the bike on the stand rotating the tire with the bike in gear will do it for you.   Kowpow225 Posted on Thursday, May 12, 2005 - 12:41 pm:        Also, go all the way up to fifth to rotate. It's much easier.   M1combat Posted on Thursday, May 12, 2005 - 12:51 pm:        If you still can't get it to rotate, you'll need to pull the plugs.   Truk Posted on Thursday, May 12, 2005 - 02:22 pm:        Thanks folks....   Buelltroll Posted on Thursday, May 12, 2005 - 02:32 pm:        Or you can click the starter. DO NOT START IT WITH THE COVER OFF!!!   Odinbueller Posted on Thursday, May 12, 2005 - 08:38 pm:        Disconnect your battery too!

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: