G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Pcmodeler Posted on Monday, May 02, 2005 - 02:39 pm:        Is the diameter of the points cover on the XB the same as the tuber's? I know the screw holes are in different locations.   Norrisperformance Posted on Monday, May 02, 2005 - 03:05 pm:        Yes If you need a custom engraved cover, let me know. www.norrisperformance.com (Message edited by norrisperformance on May 02, 2005)   M1combat Posted on Monday, May 02, 2005 - 03:13 pm:        I "think" there's another set of screw holes under the cover that will allow you to use any cover... I have a classic HD "1" that I'll be putting on my XB .   Norrisperformance Posted on Monday, May 02, 2005 - 04:19 pm:        There is a backing plate behind the cover. You can drill the rivets out, and thread the holes with a # 10/32 tap. You can then use any Big Twin style covers available. www.norrishp.com/points_covers.htm I also make covers just for the XB, they will replace the stock cover and backing plate. www.norrishp.com/billet_aluminum.htm Both style covers are machined in house from billet aluminum. And can be custom engraved. There is also a ton of aftermarket covers available.   Rageonthedl Posted on Monday, May 02, 2005 - 08:28 pm:        I have one from a Sportster on mine... looks great, ill take a pic later

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: