G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Crazy_z Posted on Friday, March 04, 2005 - 09:55 pm:        Has anyone else stripped out one of the mounting tabs on their D&D exhaust. I was so pissed when it happened. I guess I will be retapping it. Luckily it was on the right side where there are three bolts holding the shroud on.   Rr_eater Posted on Friday, March 04, 2005 - 10:13 pm:        To be honest, I was a bit worried about stripping mine as well, as the paint had sand like crap in it that was stuck in the holes. I used a tap to just run through real quick, knocked all that crap out, and no problem on install. Sorry to hear, just try using the same size tap to clean out first, you might just be surprised what a little "love tapping" can do!! LOL Bruce   Wardog3187 Posted on Saturday, March 05, 2005 - 07:54 am:        I had no problems mounting my D&D. I guess I was just lucky. Since I put it on this winter and ran it a few times, my problem now is rust.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: