G oog le Buell 1125R Forum | Login/out | Topics | Search | Custodians | Register | Edit Profile


Buell Forum » 1125R Superbike Board » 1125R rear stand « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Mog
Posted on Friday, July 19, 2019 - 09:59 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Want to get a rear stand from some company such as Woodcraft. They make the front and rear stands I use for the XBRR.

The problem is that the 1125R has no spool mounts, the RR does. The Woodcrafts are not offered in a strictly 1125R but is made so it will fit the width of the other XB Buells.


brr spooled rear


I would like an off the shelf (if possible) and/or group of parts that quickly attach (maybe a spindle through the hollow rear axle tapered I.D. with spools) or similar so that there are no holes to be drilled.


1125r rear tapered ID axle


It is for our son who has the bike 2,200 miles away in MT. Any help would be appreciated in locating the pieces needed. Does the Woodcraft XB front stand fit the 1125r without any modifications?
Top of pagePrevious messageNext messageBottom of page Link to this message

Terrys1980
Posted on Saturday, July 20, 2019 - 05:51 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

There are plenty options for rear axle sliders/spools.
https://www.amazon.com/Knight-Design-Sliders-model s-anodized/dp/B00ECHLAFG
https://www.google.com/search?q=buell+rear+axle+sl ider&oq=buell+rear+axle+slider&aqs=chrome..69i57j6 9i59l2j69i65l2j69i60.4307j0j7&sourceid=chrome&ie=U TF-8

The 1125R does have spools on the 09-10 models.

I've used the same head lift pin stand on XB, 1125 and 1190. They all use 18mm pin.
Top of pagePrevious messageNext messageBottom of page Link to this message

Tribalreaper
Posted on Saturday, February 08, 2020 - 10:48 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Pit bull is a great stand for the rear and front.
Top of pagePrevious messageNext messageBottom of page Link to this message

Coastrambler
Posted on Sunday, February 09, 2020 - 02:26 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Just be aware that the 1125 swingarm is wider than most. I had to look for a while to find a stand.
Top of pagePrevious messageNext messageBottom of page Link to this message

Cupcake_mike
Posted on Monday, February 10, 2020 - 01:26 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Never saw the point of rear axle spools...

The vast majority of time my bikes are on a rear stand is to pull the rear wheel, which you obviously can't do with those axle spools.
Top of pagePrevious messageNext messageBottom of page Link to this message

1_mike
Posted on Tuesday, February 11, 2020 - 02:17 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Really...wider than most..!?

Never heard of muscle power ?
Stand on the ground, sideways, stand on one leg of the stand and pull on the other leg of the stand.
Check fit. Pull more or push as required to fit.
Simple.

I have three stands that I "modified"...for the Buell swingarm.

Mike
Top of pagePrevious messageNext messageBottom of page Link to this message

Terrys1980
Posted on Tuesday, February 11, 2020 - 08:42 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

^ applies to Venom brand for sure!
Top of pagePrevious messageNext messageBottom of page Link to this message

Shoggin
Posted on Tuesday, February 11, 2020 - 05:49 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

This is what you asked for, but honestly I ended up threading the swingarm on the XB for spools later

https://www.buellxb.com/forum/showthread.php?53809 -Cooter-makes-a-handy-XB-rear-stand-mount
Top of pagePrevious messageNext messageBottom of page Link to this message

Stevel
Posted on Wednesday, February 12, 2020 - 12:25 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Shoggin,
That is a shaky fix because the swingarm wall thickness is way too thin to support tapped threads. I addressed this issue years ago. The correct solution is to drill for a welded in boss. I used a 12mm plug 10mm thick. That was then drilled and tapped for an M8 thread.
Top of pagePrevious messageNext messageBottom of page Link to this message

Evilrx
Posted on Monday, February 17, 2020 - 06:29 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Trackside Rearstands have spool and non spool lift adapters that can work, as far as width I bent mine a bit to get it a bit extra wide but you can also just loosen the bolt and lift the adapter at an angle with no mod

https://www.hondagrom.net/attachments/photo-3-4-jp g.9805/
Top of pagePrevious messageNext messageBottom of page Link to this message

Shoggin
Posted on Monday, February 17, 2020 - 01:17 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Stevel, thanks for the heads up! I agree with ya, the arm is strong enough to support the bike, but not on threads alone. I backed the bolts with a thick washer on the inside of the swingarm, and a nylock nut.

I think using a spool with a large diameter footprint is important too for the same reason. They still work perfectly: )

https://www.buellxb.com/forum/showthread.php?54446 -Cooter-puts-spools-on-an-XB
« Previous Next »

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional.
Password:
E-mail:
Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.)
Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration