|Posted on Saturday, March 30, 2019 - 03:30 am: ||
Sure the answer is already here but so much to read and im now confused. On my 08 i now get system voltage error when starting. Once its running its fine, no issue riding at all. Any ideas?
How do i get the ic to display the voltage so i can see what thats doing?
Its kept on a tender, by end of long day of short runs it sometimes takes a few cranks to start, but think thats just down to the short hops.
|Posted on Saturday, March 30, 2019 - 08:28 pm: ||
A couple of questions, how old is the battery, did you check all of the ground wires connections? To see the voltage, press and hold the toggle and mode buttons on IC at the same time while you turn the key to the on position, then you can scroll through them menu to you see live data, at some point you will see the voltage. I am just guessing for what it is worth, but I would check the start relay under the seat with the other 4 relays.
|Posted on Wednesday, April 03, 2019 - 12:55 pm: ||
Thanks for the reply, just had chance to have a first quick look. Battery seems fine charging and seems to be holding said charge from tender. Relays look on no obvious signs from a quick visual. Will get out on a decent ride with the voltage showing on ic and let you know what comes back. Maybe just a gremlin seems to still ride fine.