G oog le Buell 1125R Forum | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Radeck Posted on Tuesday, July 19, 2016 - 08:29 am:        1125cr started but engine stoped after 5-10 seconds on the cold engine. on 4000rpm 3 minutes works after on low rpm work ok. errors on buelldroid 24/coil 2 short to ground 22/AIC short to ground or open on display odometers : ACT INT SYS ERR P2303: RR IGN SYS ERR HELP !!!!!!!!!!   Terrys1980 Posted on Tuesday, July 19, 2016 - 10:29 am:        Either a short in the harness or ECM is going bad.   Nuts4mc Posted on Tuesday, July 19, 2016 - 10:35 am:        The wires going to or attached (soldered) to the ignition switch can break or short out...there isn't enough "slack" in the harness, turning the bars while the bike is running may give you a "clue" as to what is wrong...that is the first place I would look, some pix in this post: http://www.badweatherbikers.com/buell/messages/290 431/717369.html?1374898861

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: