G oog le Buell 1125R Forum | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Zhen13 Posted on Saturday, June 04, 2016 - 04:37 pm:        It says in the manual you have to rotate the motor to get to the connector to replace the CKP sensor. Has anyone replaced one? Is there a workaround like there is for the plugs? Any info is greatly appreciated .   Willmrx Posted on Saturday, June 04, 2016 - 08:35 pm:        Yes I have. I had to rotate the engine. The problem is the size of the connector is to big to snake through the wire harness cover. You could cut the old one out and reroute the new one so you do not have to use the wire harness cover. You can also connect the new one and leave the old one in place to check to see if it truly is the CKP sensor. Which I should have done, because the old one was good! Well it did gave me something to do for a while. (Message edited by willmrx on June 04, 2016)

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: