| Author | Message | ||
     Bumpnzx3 |
I thought I had a set of these from my old 1125r, but I can't seem to find them now that I need them. Anyone know of a source? | ||
| Deanh8 |
yeah I need another set also | ||
| Two_seasons |
American Sport Bike sold them. They are no longer in business. I would think you could use duct tape to fill those voids. I assume you need them for track use? | ||
| Bumpnzx3 |
Correct - track use. I've taped up before, but I'd like a better looking solution. If I can't find the filler panels, I'll just buy a fiberglass upper from Airtech or Flexiglass. | ||
| Snacktoast |
EBR used to sell them, but I think they sold out over a year ago. Likely no restock. | ||
| Two_seasons |
You could cut some "luan". Lightweight and strong wood material that comes in sheets. Washers on both sides with Loctite to hold tight. | ||
| Nm5150 |
All they are is head light lenses with screws like you use for a wind screen and they are clear(you have to drill the holes).You can buy red painters tape(or black) and tape them before you install them and use red zip ties for the mirror/blinker holes.I have a dedicated stock fairing I got cheap and installed them for track days so I can pull the head light assembly and won't break it in case of a crash.Buy the time you put numbers on and some sponser stickers on you're good.If you go fast enough no one will be able to tell  | ||
| Nm5150 |
Oh.St. Paul HD or scan e-bay.I would rather spend money on tires and warmers,wheels,suspension,brakes etc. IMHO. |
