G oog le Buell 1125R Forum | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Tcbolt Posted on Saturday, April 23, 2016 - 01:45 pm:        Pulled the catch screen under the bike today to drain the oil and found little pieces of white plastic in the screen. Traced it to the epoxy coming off from the charging rotor. Is there a way to remove the rest of the epoxy on the rotor? Is there a way for me to reepoxy the rotor? Or does this need to be handled by a special shop? Thanks for any input.   Dennis_c Posted on Saturday, April 23, 2016 - 02:32 pm:        I put JB Weld on mine its held up at least 15,000 miles   Tcbolt Posted on Saturday, April 23, 2016 - 07:55 pm:        Thanks Dennis. I'll give that a try. How did you go about getting the old epoxy off? Heat? Pick and scrape it out?   Dennis_c Posted on Sunday, April 24, 2016 - 01:05 pm:        pick the loose leave good

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: