G oog le Buell 1125R Forum | Login/out | Topics | Search | Custodians | Register | Edit Profile


Buell Forum » 1125R Superbike Board » Archive through July 27, 2015 » Oil change without the crankshaft oilI « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Bkoenig
Posted on Thursday, July 09, 2015 - 09:27 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Hi all, just bought my 1125r last week. It was overdue for an oil change so I picked up some rotella T but wasn't able to find a filter nearby and am having it shipped. I didn't realize that there was a second drain under the crankshaft and only drained the main plug. Then I put in a little under 2.5l into the tank. I rode it about a mile and checked the levels. Straight up, it seemed to be well over the fill line. On the kickstand it is between min and max.
How much oil is usually drained from the crankshaft?
Will I cause damage to the bike if I ride it moderately for 300 miles before the filter gets here and I am able to flush the system again?
Any other tips for a new 1125r owner?
And will someone please supply me with a pdf of the service manual?
Thanks everyone, safe riding.

(Message edited by b-koenig on July 09, 2015)
Top of pagePrevious messageNext messageBottom of page Link to this message

Sprintst
Posted on Thursday, July 09, 2015 - 10:34 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

You will be fine to ride it w/out the filter being replaced yet

There's definitely some that comes out the right side, but all you've done is a mix a little more old oil with the new than you would with a correct change

It'll be fine.

I'll send you a pm with a link to the manuals

(Message edited by sprintst on July 09, 2015)
Top of pagePrevious messageNext messageBottom of page Link to this message

Nuts4mc
Posted on Thursday, July 09, 2015 - 10:47 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

if you go back to the main page...where there is statistics on the number of units built/year.... you will see links for oil level readings/manuals and a link for new owners...welcome
Top of pagePrevious messageNext messageBottom of page Link to this message

Bkoenig
Posted on Thursday, July 09, 2015 - 10:52 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Thank you. Just a little paranoid, want to take care of it.
Top of pagePrevious messageNext messageBottom of page Link to this message

Froggy
Posted on Thursday, July 09, 2015 - 10:59 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

The oil filter has a longer service interval than the oil, so might not even need the filter anytime soon. Oil is every 6200 miles, filter is 12400 miles.
Top of pagePrevious messageNext messageBottom of page Link to this message

Dennis_c
Posted on Friday, July 10, 2015 - 12:13 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

about 3 qt. oil there is a third place to check its buy the other drain hole its got 5 bolts to take out and a filter screen in there
Top of pagePrevious messageNext messageBottom of page Link to this message

Dennis_c
Posted on Friday, July 10, 2015 - 12:27 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

This is what Iam talking about http://www.badweatherbikers.com/buell/messages/290 431/765237.html?1435413902
Top of pagePrevious messageNext messageBottom of page Link to this message

Duanelr
Posted on Saturday, July 11, 2015 - 11:41 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Woops, careful. I don't think Rotella is intended for motorcycle use.
http://www.shell.com/rotella/products.html
I hate splitting hairs on most things but this does make a difference.
You want to use oil that is API rated for motorcycle/ATV use. It should have JASO-MA emblem on the back.

http://www.bobistheoilguy.com/forums/ubbthreads.ph p?ubb=showflat&Number=2647970

Take the following worth a grain of salt: In an emergency I knowingly put Rotella in my bike and a couple hundred miles later the clutch drug badly.
Top of pagePrevious messageNext messageBottom of page Link to this message

Nuts4mc
Posted on Saturday, July 11, 2015 - 08:13 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

the T6 ( 5-40wt) runs too thin down here in the heat of the south west...had balance gear failure...was it from poor heat treating or lack of lubrication???( see pix in this post):

http://www.badweatherbikers.com/buell/messages/290 431/693543.html?1353426484

switch'd over to 20-50w Quicksilver (from Mercury Marine) available at WalMart same price as the T6...bike/clutch/gearbox seems to like it.

http://www.quicksilver-products.com/street/lubrica nts/

I doubt it is JASO MA certified ( certification costs $$$)...but they claim it meets or exceeds the requirement
Top of pagePrevious messageNext messageBottom of page Link to this message

Sprintst
Posted on Saturday, July 11, 2015 - 09:45 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Shell Rotella T6 is for motorcycle use, it cares JASO-MA rating for motorcycle usage

The added benefit is that it is used in heavy duty diesels, so it's got metal conditioners for long life you don't find in most oils today

(Message edited by sprintst on July 13, 2015)
« Previous Next »

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional.
Password:
E-mail:
Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.)
Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration