|Posted on Thursday, February 26, 2015 - 03:09 pm: ||
So I'm compiling the charging fix materials to be done this spring when I get a chance.
I am looking into getting the ce605 r/r from roadster cycles but am confused on how to wire it up. I've read things about wiring it straight to the battery or not to. I've read a few writeups on the forum and externally on how to's. But looking at the picture listed on the site you need to purchase the Deutch connectors that have been listen on how to's but where do you put the free wires in the pins? Is there a specific order they need to be placed into, for one I know there is a ground and positive but the one with 3 wires I seam lost. Granted I have yet to take it apart so it might be an easy task once I look at it.
Just wondering if there is any picture of wire that shows what wire goes to what plug in the connectors. I've read hildstroms and bags articles which are great but its this one thing I'm hung up on.
|Posted on Thursday, February 26, 2015 - 05:54 pm: ||
Yes the Ce605sb goes right to the battery. I cut the plug off of my stock regulator and soldered the wires together. The pins do not make a difference in the order you place them.
(Message edited by Shawns on February 26, 2015)
|Posted on Thursday, February 26, 2015 - 09:08 pm: ||