| Author | Message | ||
     Andros |
Sincei have upgraded to small leds fron and rear i now have hyper blinking. I am going to add appropriately sized resistors. My question is if i can get away with adding only add resistors on the rear to fix both front and rear? Or will i also need them in the front too? | ||
| Jcjohnson33 |
One resistor on each side should do it. | ||
| Cf_z |
Since the bike came with LED front turn signals from the factory, Its a safe bet you wont need to add any to the front. Personally i think fast flashing turn signals are a benefit for a motorbike. We can change lanes much faster than a car, and having 3-4 flashes per second vs 1-2 is more attention grabbing to the cagers. | ||
| Shawns |
If you keep the stock mirrors your fine, none will be needed for the front. |
