| Author | Message | ||
     Brokengq |
So last year was the shovelhead and the year before was the panhead. This year is the 1125r. Looking for mod/upgrade ideas to do over the winter. Relatively low cost ideas that aren't HEAVILY involved. I already plan on doing the LED brake light mod for the passenger peg brackets and possibly painting/powder coating the calipers on top of doing my next valve inspection. Any other good ones? I was thinking maybe a race rotor also. (Message edited by brokenGQ on November 07, 2014) | ||
| Rogue_biker |
Rear fender eliminator? Remove passenger footpegs? Cleans up the rear real good. Sorry I can't help it. But check mine out: https://www.flickr.com/photos/36653239@N08/1507625 2253/in/photostream/lightbox/ | ||
| Brokengq |
Already did the fender eliminator when I got the bike. Can't stand the stock fender. I carry a rider fairly often so pulling the pegs isn't an option. In fact I was going to drilling it out and install led brake lights into it. | ||
| Advanguard |
battery on tender near 16K do the valves exhaust wrap mirror eliminate, use bar ends | ||
| Dannybuell |
This is a must have: http://americansportbike.com/newdir/Item/A16501 |
