| Author | Message | ||
     Scoota |
Today I tried to change my clock. I had the ignition on and I held down the toggle and mode switches for 5 seconds and nothing happens. It won't go into the setup mode. I've tried holding toggle and mode switches for longer than 5 seconds- still nothing. I do not have the cluster locked with a PIN. So, I don't know why I can not perform this function. Any suggestions? | ||
| Malott442 |
Kill switch position? | ||
| Scoota |
kill switch is on | ||
| Scoota |
Sorry I meant it's in the run position | ||
| Brokengq |
Can you go into diag mode? Swap between odo and trips? Swap between temp screen and mpg screens, gear indicator, etc? | ||
| Scoota |
yup both switches are working when you use them one at a time.But when I hold both of them down together to get into setup mode nothing happens.I tried disconnecting the battery and that didn't work either.I don't have a gear indicator as my 1125 is an 08. |
