G oog le Buell 1125R Forum | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Mrsuperbuckets Posted on Sunday, October 19, 2014 - 12:25 am:        So I'm in the middle of a rebuild and I am working on the electrical system, I am more of a nuts and bolts guy than a electrical wizard. My speedometer,horn,left rear turn signal and brake light refuse to operate and I'm kinda stumped. I checked the fuses, they were all intact and none were blown. Does any one have any ideas?   Brokengq Posted on Sunday, October 19, 2014 - 01:06 am:        Sounds like the ground to the fuse box? Just an idea. Somewhere that all of those items share a common ground.   Torquehd Posted on Sunday, October 19, 2014 - 04:14 am:        I had a similar issue when I failed to position my speedo sensor wires away from the exhaust pipe. The exh pipe melted the wires' insulation, and everything went haywire from there.   Nikoff90 Posted on Sunday, October 19, 2014 - 08:02 am:        Grounds are important make sure all are connected.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: